Bill,
I usually apply a light coating of white lithium grease (like Lubriplate) to
these parts when I assemble them.
Rich Chrysler
----- Original Message -----
From: <wericars@aol.com>
To: <healeys@autox.team.net>
Sent: Wednesday, June 20, 2007 8:48 AM
Subject: Grease, dry, or both?
> First, thanks to Richard Chrysler and the others who gave me excellent
> information on how to remove the roll pins from my gear change lever.B
> Once I
> had everything out, I cleaned the lever, the plastic bushing, the ball
> socket
> in the shifter towerB and the receiver that accepts the plastic bushing.B
> Now
> that it is all nice and clean, I'm wondering what I should grease and what
> I
> should leave dry.B The Workshop Manual appears to be silent on the
> subject.B
> Any thoughts?
>
>
> Bill
> Boston area
> 65 BJ8
|