Mark ... My Tech Talk book has an error on page 16
figure 4 should be 10 amp fuse and the 5th line down
(same page )... the fuse will go in the white wire
from from A3 on the fuse box to the relay , see figure
4 page 16 ... BN1 Figure 3 the fuse will go A3 TO
SELECTOR SWITCH ... This article was first published
in AH Magazine April 1993 and this is the first time
the error showed it self , will change it in future
books we sell ... SORRY FOR THE ERROR NORMAN NOCK
--- Mark and Kathy <mgtrcars@galaxyinternet.net>
wrote:
> The Nockmyster suggests putting a 50A fuse in the OD
> line. I assume this goes
> in the white line coming off the OD switch that
> feeds into the OD relay? The
> tech book is a bit confusing as to exactly where the
> fuse goes.
>
> Does anyone know where I can find a 50A inline fuse
> holder?
> I have found a 10A, 20A, 30A holder so far, nothing
> bigger.
>
> If the 20A holder uses 12 gauge wire what would the
> 50A use?
> That has to be a pretty chunky cable I would think.
>
> Yes, I have all the techy books for reference.
>
> Thanks for the help, Mark
|