Mark I bought a set about a year ago. Still had the same problem. The
ones from Heritage were much better - but no molded in holes to reduce the
stiffness. :)
Bob
Mark and Kathy wrote:
> Ordered these for a 3000 BT7 in 2003. I also ordered the solid metal
> seat pans.
>
> This was a common situation in per the archives, just wanted to see if
> the products have changed any since.
>
> Thanks, Mark
>
>
> ----- Original Message ----- From: "Charlie Baldwin"
> <mgcharlie@comcast.net>
> To: "Mark and Kathy" <mgtrcars@galaxyinternet.net>; "healey list"
> <healeys@autox.team.net>
> Sent: Sunday, April 29, 2007 9:07 AM
> Subject: Re: Seat Foams, again
>
>
>> Mark,
>> What model are these foams for?
>> Charlie
>>
>> Mark and Kathy wrote:
>>
>>> I purchased seat foams about 3 years ago from Moss and they are the
>>> ones that
>>> don't completely fill out the metal pans as mentioned in the Archive
>>> history.
>>> Has any one purchased seat foams from Moss recently and have they
>>> changed
>>> them to fit the seat pan entirely?
>>>
>>> Is Brit. Car Specialists the only company that carries the foam that
>>> fits the
>>> metal seats? Does Heritage foam fit?
|