Ken -
Drill a hole in the spigot top, tap it, then put in a steel dowel with a
threaded end (you can do it with a die if you want, or cut the head off a
small screw or bolt with a unthreaded shank). The lever on the drain tap
should have been designed with steel from the factory, not brass... brass
just isn't strong enough to hold up to the strain.
Alan
'52 A90
'53 BN1
'64 BJ8
On 2/16/07, Freese, Ken <Kendall.Freese@aerojet.com> wrote:
>
> Anybody have an easy fix for a broken handle on the drain taps? I don't
> think they are screwed in.
> Ken Freese
> 65 BJ8
|