Tom -
Most off the shelf paint will stick to the brown primer stuff quite easily.
If you are worried, give it a once over with a solvent like turpentine or
acetone then follow up with emory paper. Nothing should flake from it if
you prep things this way.
Alan
On 2/12/07, Tom Rech <tdrech@sbcglobal.net> wrote:
>
> I have many loose suspension parts from my BT7 project that were painted
> by
> the PO with the typical reddish-brown or gray spray bomb primer. I'm
> assuming that it is Rustoleum enamel primer, but not 100% sure. I would
> like to paint many of these parts with a durable black paint that won't
> flake off if I spray it over the Rustoleum primer. Can anyone recommend a
> good paint/process to use? I don't want to remove the primer if I don't
> have to, but will if it is necessary.
>
> Tom Rech
> 59
|