I did something a little different. I took a 1/2" box end wrench and filed
down both faces to make it thin enough to use. The longer length lets me
pass it from one set of fingers to the other. The other closed end makes a
pinky hole to insert my finger into to keep from dropping it (quite as
often.)
Bob Johnson
BJ8
> Hi Lee, I just took an inexpensive open end wrench (1/2" on one end and
> 7/16" or 9/16" on the other - it wouldn't matter) and put in my vise and
> hacksawed it off. I left only about 1" of shank behind the end. If I
> did it all over again, I'd leave about 1.5" of the shank as it's a bit
> easier to get hold of the longer shank for my fumbling fingers. Anyway,
!
|