Bill, did you "bypass" the brake switch directly at the switch? Just jumper
it at that point to absolutely ascertain that the wiring is good.
== Alex in Maine
1960 BT7 3000 Mark 1 - "The Blue Mainie"
1946 MG-TC - "Norton"
Former owner of 1957 AH 100-6, 1967 AH 3000 Mark III BJ8, 1965 MG
Midget http://users.adelphia.net/~alexmm/ai2q.htm
----- Original Message -----
From: Bill Matthews
To: healeys@autox.team.net
Sent: Monday, January 29, 2007 7:37 PM
Subject: Brake switch-Servo problem
Hello,
I am stumped.
When I bypass the brake switch the brake lights come on which leads me to
think that the brake switch is either defective or there is not enough
pressure in the system to activate the brake switch. ................
|