Gordy,
In a left-hand-drive BN4, in addition to the rear and right side parcel tray
flange attachment screws, the only other attachment point is a parcel tray
attachment bracket that attaches to the middle of the left side tray flange
and run straight up and attaches to a metal tab welded to a shroud support
piece. I don't see evidence of any holes in the bottom of my parcel tray,
although it is covered on both sides with vinyl cloth.
Took Erika out for a short spin to Starbucks today - about 60 degrees.
Vrooom vrooom,
John
Erika the Red
----- Original Message -----
From: <ggilliam@usol.com>
To: <healeys@autox.team.net>
Sent: Saturday, December 30, 2006 9:32 PM
Subject: Parcel shelf question
> Happy New Year to all of you!
>
> I finally found the parcel tray for my Longbridge BN4 that has been
> miss-placed for a couple years...of course it was in rather plain sight
> in my workroom, just under the vinyl and carpet pieces for it on a
> shelf. The problem is I forgot what the mounting for it looks like. The
> rear and right side flanges are obvious, but there are also three holes
> in the tray and an impression in the old carpet piece that look like a
> bar of some sort was placed parallel to the driveline, about a quarter
> of the tray width from the left edge. Any hints on what parts I'm still
> missing? (and what they attach to?)
>
> As a side note, we took the Healey for a drive today, the latest I've
> ever had it on the road. 44 degrees, dry and sunny in mid-Michigan at
> the end of December is strange!
>
> Wishing you Health and Happyness,
> Gordy
|