I do believe that they are different if you want original hardware. The
Longbridge used a sleeve with a hole for the cable and a bolt that
screwed into it to tighten as I recall, I am running HD6's now and used
the hardware shown on John's link. You can also make something that
works using a bolt, nuts and washers; drill a hole the size of the cable
into a bolt then use washers or nuts to get the correct spacing so that
when you clamp the nut onto the bolt the cable is then locked into
position.
HTH
Don
-----Original Message-----
From: owner-healeys@Autox.Team.Net [mailto:owner-healeys@Autox.Team.Net]
On Behalf Of Patton Dickson
Sent: Wednesday, December 20, 2006 8:35 AM
To: John Sims
Cc: Alan Seigrist Blue 100; Healey List
Subject: Re: Choke cable stop clamp
The one for the 100's and Longbridge car is different than that (I
think).
Can anyone with a Longbridge car or a 100 confirm. I will ask Don.
Thanks
Patton
|