healeys
[Top] [All Lists]

RE: Wiper motor removal

To: "Stephen Hutchings" <s.hutchings@rogers.com>
Subject: RE: Wiper motor removal
From: "Brashear, Jack, N" <JNBrashear@garverengineers.com>
Date: Mon, 20 Nov 2006 16:10:29 -0600
Hi Stephen, don't sweat it...the "bolt shafts" will just unscrew from
the motor case.  Kinda makes everything a little easier to remove the
motor/gear box assembly when that happens anyway.
Jack

-----Original Message-----
From: owner-healeys@autox.team.net [mailto:owner-healeys@autox.team.net]
On Behalf Of Stephen Hutchings
Sent: Monday, November 20, 2006 4:02 PM
To: healeys@autox.team.net
Subject: Wiper motor removal

OK, here's another stubborn item. When trying to undo the nuts 
holding the wiper motor mounts to the underdash bracket- I can see 
through the gaps between the rubber bushes that the bolt shafts are 
turning with the nuts. Because I haven't had to remove this item 
before,  I would appreciate any suggestions on how to separate the 
two!

Stephen, BJ8




<Prev in Thread] Current Thread [Next in Thread>