Re: Rebirth of BT7 6744 Continues

[Alan Schultz <alan@andysnet.net>]

Mark,

Disconnect the heavy cable from the starter solenoid. Connect a 12 volt 
lamp in its place and the other end to ground. Try pushing the button on 
the solenoid and see what happens. Either the solenoid is defective or 
some how there is an electrical loop that holds the solenoid engaged.

This is an easy test.

Alan
BJ8


Mark and Kathy wrote:

>decided to try the push button on the solenoid,  BINGO, we have ignition,
>ignition, ignition,   IT WON'T TURN OFF, no matter what I do it keeps
>cranking.