Agreed. That is the way I pulled the engine and gearbox on my BJ7.
Peter Schauss
1963 BJ7
1980 MGB
> -----Original Message-----
> From: owner-healeys@autox.team.net [mailto:owner-healeys@autox.team.net]
> On Behalf Of Per Schoerner
> Sent: Wednesday, October 18, 2006 6:31 PM
> To: healeys@autox.team.net
> Subject: SV: Pulling the Motor BN1
>
> Hi
> I have a chain of suitable length with a bracket in each end. I attach
> these
> brackets to the rocker arm studs and lift the engine with that. That is
> the
> way it is described in the work shop manual, if I'm not mistaken. With
> this
> arrangement the engine/transmission assembly adjusts itself automagically
> to
> a suitable angle. I have also seen an A35 that had brackets attached to
> the
> rocker arm studs outside the rocker cover, even better I think.
>
>
> Best regards, Per
>
!
|