David -
It won't make a huge difference either way, the main thing is to do it all
at the same time so that the valves are all adjusted under the same
circumstances. Doing it cold has the benefit of not having oil film on the
cam and cam followers change the adjustment, but in my experience this is
usually not a huge issue.
Alan
On 10/5/06, David Z <davzu29@cox.net> wrote:
>
> How much of a difference is there between the measurement of valves by
> adjusting them when they're cold verses hot? I recognize steel will
> change
> its dimension with varying temperatures.
>
> David Z.
|