I welded the hole closed and redrilled.
Ned Smith
BJ8
near Chattanooga, TN
N34.98 W85.5
-----Original Message-----
From: owner-healeys@autox.team.net [mailto:owner-healeys@autox.team.net] On
Behalf Of Tracy Drummond
Sent: Wednesday, August 23, 2006 8:29 AM
To: healeys@autox.team.net
Subject: Oblong clevis pin holes in pedal box
I have an oblong hole where the master cylinder rod attaches to the foot
pedal. I replaced the clevis pins in both the brake and clutch pedals but
alas still some play on the one causing annoying little thumps when the
clutch engages and another (often delayed) when released.
What is the defacto repair for this?
Tracy
|