Dave,
On the 6 cylinder models with the vinyl trimmed dash there is a black gloss
steady bracket that fastens inside the dash panel to the bottom lip of the
dash immediately outboard of the 2 little screws that hold the instrument
lighting on/off slide switch. The forward end of the steady bracket turns 90
degrees down and fastens to the bulkhead air box with 2 screws. See
pictures. The bottom of the steady bracket can be seen in the one picture
immediately to the right of the steering column brace. You can just see the
lower of the 2 screws into the bulkhead.
Rich Chrysler
----- Original Message -----
From: <HealeyBN7@aol.com>
To: <healeys@autox.team.net>
Sent: Monday, July 24, 2006 12:54 PM
Subject: Dash installation detail
>A dash installation question - as the archives and parts manual were not
> conclusive on this:
>
> The parts manual shows a 'steady bracket.' Apparently this steady
> bracket
> acts to 'steady' the somewhat unsteady dash panel(?) Exactly from where
> to
> where does this steady bracket attach?
>
> Any chance someone can send me some detail, or a picture? Thanks!
>
> Dave
> '61 BN7
[demime 1.01d removed an attachment of type image/jpeg which had a name of
P1010075.JPG]
[demime 1.01d removed an attachment of type image/jpeg which had a name of
P1010025.JPG]
|