Ned,
A pckle fork is a tool with 2 wedge shaped tines. The fork tines fit either
side of the ball joint to be removed. A hammering pressure on the end of the
handle drives the wedge motion between the parts of the joint and pops the
tapered joint apart.
Rich Chrysler
----- Original Message -----
From: "Ned Smith" <smithn00@kitepilot.net>
To: "'Steve B. Gerow'" <steveg@abrazosdata.com>; "'Healeys'"
<healeys@autox.team.net>
Sent: Thursday, July 13, 2006 7:52 AM
Subject: RE: lower front suspension pin removal observations
> What the hell is a pickle fork? (relative to auto mechanics)
>
>
> Ned Smith
> BJ8
> near Chattanooga, TN
> N34.98 W85.5
|