Don't seem to be able to locate this part or 0236693 p/n on TSC's Web site.
Anyone got an exact URL?
== Alex in Maine
1960 BT7 3000 Mark 1 - "The Blue Mainie"
Former owner of 1957 100-6, and 1967 3000 Mark III BJ8
http://users.adelphia.net/~alexmm/ai2q.htm
----- Original Message -----
From: dcong996@earthlink.net
To: John Sims ; 'Tracy Drummond' ; healeys@autox.team.net
Sent: Tuesday, July 04, 2006 6:19 PM
Subject: Re: Sunken fuel level sending float replcement
John , I bought a set of spark plug wires from The Tractor Supply Company
(TSC ) that were better than those from Moss, for about half the cost. These
were copper stranded core, nice molded rubber ends for the plugs, brass
connectors. They are black and look "period". They are probably not the
quality of the super high performance wires, but cost about $10 and looked
more authentic.
They come with boots and plug in type connectors for the coil if you have a
modern type coil. I removed these to use with my original pin screw type
coil. The wires were very long and can be cut to fit.
The TLC part number for the 6 cylinder set is 0236693. Four cylinder sets
were also available.
I also saw generic 12 volt ignition coils, and Champion spark plugs of the
correct current replacement numbers
FWIW
Dallas Congleton
1967 BJ8
1953 MGTD
|