David,
According to the Bentley reprint of the shop manual, "the length of the
distance piece must be 2 in."
I use a 2-inch bolt.
bs
DavidWMalaney@eaton.com wrote:
>All,
>
>I have read that you should place a spacer between the shock arm and shock
>platform in order to approximate laden ride height for final torque setting on
>front suspension bushings. Here is the question: should the spacer be 1.5
>inch or 2 inch? Seems I have come across both dimensions in the archives.
>Which one's right? Or, either one will work and be close enough.
>TIA
>
>***********************************
>Dave M.
>
>Your messages not reaching the list?
>Check out http://www.team.net/posting.html
>
>
>
***************************************************************
Bob Spidell San Jose, CA bspidell@comcast.net
'67 Austin-Healey 3000 '56 Austin-Healey 100M
***************************************************************
|