Hi John -
I originally thought of doing that, but realized the five bolt pattern
wouldn't work. Besides, I like the look of the original 16" disc
wheels so I was hoping there was another solution out there.
I do know that at sometime well in the past, someone was making a four
bolt disc brake conversion kit for the BN1, but I don't know if that
kit is still out there in bizzaro world.
Alan
'53 BN1 '64 BJ8
On 6/28/06, John Harper <AH@jharper.demon.co.uk> wrote:
> Alan
>
> I am not doing this but I am in the process of fitting A90 Atlantic 11"
> x 2 1/4" brakes to my early BN1 using special front hubs on the front
> and spacer rings on the rear.
>
> However I thought that most owners when fitting disc brakes to a 100
> used the 3000 parts including the 3000 hub. If so your 16" wheels may
> not fit.
>
> As I have not done this myself I could be wrong so more input from
> others would be helpful.
>
> Regards
>
> >
> >I'd like to convert my A90 Atlantic to front disc brakes (same bolt
> >pattern and axle as a BN1) but keep the same bolt pattern so I can
> >keep the 16" disc wheels on the car.
> >
> >Anyone have any experience with something like this?
> >
> >I am not mad, I promise you!
> >
> >Cheers,
> >
> >Alan
> >
> >'53 BN1 '64 BJ8
> >
>
> --
> John Harper
|