They make straps with a metal loop at each end, so that you can position
those short straps around painted surfaces without scrathing. They the
hooks and ratchet straps for the dyno setup hook onto those short straps.
I would loop one on each side of the rear axle, and one around each frame
rail right behind the engine mounts for the front.
Make sure you watch those folks running the dyno, so they don't do anything
bad like rev it to 6500 rpm.
Cheers,
Chris
BJ8
----- Original Message -----
From: "William Moyer" <William.Moyer@millersville.edu>
To: <healeys@autox.team.net>
Sent: Wednesday, April 12, 2006 7:15 PM
Subject: dyno
> Hi gang,
>
> I'm taking the Healey to a charity car show at the end of the month and as
> part of the event they've got a deal set up with a portable dyno. $40 for
> three runs. I'm wondering what you would attach the restraint straps to.
> I
> don't have a world of confidence in those bumper brackets and I can just
> see
> myself flying off that platform. This is for a 3000 Mk II.
>
> Bill Moyer, BJ7
|