Steve,
With cyl#1 at TDC on compression stroke (rockers on #6 will both be
"rocking") adj. lash on #1, rotate so #5 is TDC and #2 is rocking adj #5,
and so on following firing order sequence..
Dave
-----Original Message-----
From: owner-healeys@autox.team.net [mailto:owner-healeys@autox.team.net] On
Behalf Of Steve Sanders
Sent: Wednesday, April 12, 2006 10:17 AM
To: healeys@autox.team.net
Subject: Valve adjustment sequence
I have seen a valve adjustment sequence which allows for setting of
clearance in order as the engine is rotated. If anyone has that sequence I
would appreciate a copy. That would be for a 3000.
Thanks
Steve Sanders
61BT7
|