If you are referring to the arched piece on the back of the top radiator
tank, that is usually painted red, it was attached to the tank with
solder on both of my cars. It's made of sheet steel and has three holes
in the small flange to allow the solder to grip it. The radiator shop
attached it wne they were putting in a new core.
Dave
Kurt Leslie wrote:
> My late 62 bt7 had no fan shroud when purchased, should it have one, if
> so how far down from the top of the radiator should it be placed, and
> how is it attached.The fan shroud in the part suppliers books appears to
> be bolted on. Thanks Kurt L.
|