Jim,
The packing plate (if needed at all) should be placed in behind the alloy
trim plate so it's not visible when installed. Your's must have not needed
them when asembled.
Rich Chrysler
----- Original Message -----
From: "James Sailer" <BJ8healey@msn.com>
To: "Healey List" <healeys@autox.team.net>
Sent: Saturday, March 18, 2006 3:37 PM
Subject: BJ8 Door Striker
> Greetings fellow listers.
>
> The door strikers on my BJ8 do not have what appears to be a shim or other
> between the door striker and the aluminum finisher. The part is
> identified as
> PLATE, Packing, striker in the MOSS catalogue, page 126. Can anyone tell
> me
> if this is an aluminum shim (or what other material) and does it go in
> between
> the striker plate and the aluminum finisher or does it go behind in the
> fender
> well? It appears it should go between the striker plate and the aluminum
> finisher but mine never had them.
>
> Thanks in advance.
>
> Jim Sailer 66 BJ8
|