Walt,
I'd start at the input side of the coil. If there is not 12V there you have
a power supply issue. Could be an ignition switch, blown fuse etc. Just
work back upstream until you find the voltage break.
If you have voltage, check the output side going to the distro. If you have
power it has to a problem inside the distro, points, condenser or ground
issue. If you have no power it could be the coil or could still be a
problem in the distro.
Good luck
Pete
-----Original Message-----
From: owner-healeys@autox.team.net
[mailto:owner-healeys@autox.team.net]On Behalf Of Walton Curl
Sent: Wednesday, January 11, 2006 10:27 AM
To: healeys@autox.team.net
Subject: Healey won't start
BT-7 running great last week, now for no good reason-Lucas aside-it will
turn over but is not getting any spark at the points. What is the best
way trace this out. I'm thinking a grounding issue or the condenser,
but appreciate any comments. Thanks
60 BT7
Augusta, GA
Walt Curl
|