Ned -
The little collar simply slides on. It may be a bit of a force fit, but
with a couple screwdrivers it should just pop off.
Best regards,
Alan
'53 BN1 '64 BJ8
On 12/1/05, Ned Smith <smithn00@kitepilot.net> wrote:
>
> I want to remove the inner frame assembly from the outer frame assembly to
> replace the rubber seal. I have removed the upper and lower pivots. The
> lower pivot collar seems to be the only thing holding the window in place.
> Does this collar slide on or screw on? Or is there something else I am
> missing?
>
>
>
> The rollup windows have been placed in their channels using the Glasspac
> that listers recommended. It assembled easily once I got the right glazing
> rubber. Incidentally, the installer I got the glazing from call it "gas
> tape" because he uses gasoline as a lubricant.
>
>
>
> Thanks to everyone for their comments.
>
>
>
> Ned Smith
>
> BJ8
>
> near Chattanooga, TN
>
> N34.98 W85.5
|