Ed, I used a piece of wood across the spring and then used two
woodworking clamps (sorry, don't know the American word for these) to
bring the spring ends out. Picture enclosed for you, not for the list.
Good luck
Jack Aeckerlin, The Netherlands
1964 BJ8 29432
Ed Orr wrote:
> I have done this job sucessfully several times in the past each time
> with much frustration . Sooo is there an easy way to do this that
> someone might share with me . I have used rachet type nylon staps but
> it's not an easy process . Could not find anything in the archives .
>
> Ed Orr '67 BJ8
> '66 BJ8 project
[demime 1.01d removed an attachment of type image/jpeg which had a name of
Pa190002.jpg]
|