Hi Ron,
My 1960 BN7 has blue vinyl covering the base frames. This was a Healey blue
car. These have never been touched.
Cheers,
Scott
Mashed BN7
http://www.geocities.com/bgeuroclassics/BG_Euro.html
>From: "Ron Fine" <RonFineEsq@earthlink.net>
>Reply-To: "Ron Fine" <RonFineEsq@earthlink.net>
>To: "Rich C" <richchrysler@quickclic.net>, <healeys@autox.team.net>
>Subject: BN7 seats
>Date: Mon, 14 Nov 2005 11:02:40 -0800
>
>Thanks Rich. I have another question you will probably be able to answer.
>Is there vinyl on the edges of the bottom bracket of the seat which bolts
>directly to the adjusting rails on a BN7. I have Moss's video and they say
>they are covered but that video is for later cars.
>Thanks again,
>Ron Fine
>(BN7 in final stages of restoration. Photos to follow when I figure out
>how
>to do it)
>
>-----Original Message-----
>From: owner-healeys@autox.team.net
>[mailto:owner-healeys@autox.team.net]On Behalf Of Rich C
>Sent: Monday, November 14, 2005 8:10 AM
>To: healeys@autox.team.net; Ronald A. Fine
>Cc: Bob Haskell
>Subject: Re: fiting gearbox cover extension panel
>
>
>Ron,
>There were usually 4 no. 8 x 1" self tapping phillips or posidrive head
>screws going down each side lip of that extension panel, through the
>carpet(see picture att'd.) Also the original parts book calls for 2 per
>each
>side no.8 x 3/4" self tapping phillips or posidrive head screws through the
>metal only, holding the bottom lip to the floor/chassis.
>Hope this helps.
>Rich Chrysler
>
_________________________________________________________________
Express yourself instantly with MSN Messenger! Download today - it's FREE!
http://messenger.msn.click-url.com/go/onm00200471ave/direct/01/
|