Mike -
When you replaced the switch, did you flush your brake system? You should
do this periodically. The switch will accumulate crap in the system if there
is loose rust, water, and rubber flakes floating around... which will cause
the switch not to work correctly. I also replaced the switch in my BN1 with
a very nice reproduction I got from Steve Norton at Cape International... it
has original screw connectors.
Regards,
Alan
'53 BN1 '64 BJ8
On 10/4/05, Awgertoo@aol.com <Awgertoo@aol.com> wrote:
>
> The brake light switch on my 100 does not make a circuit unless I step on
> the
> pedal very hard. I don't see anything about adjusting it and wonder if
> anything short of replacing it can be done. BTW I replaced the last switch
> about
> one year ago with this one--I use DOT 3/4 brake fluid.
>
> TIA--Michael Oritt
|