I'm trying to figure out the correct way to route the wiring as it
goes from the flasher relay to the front of the car with the lights
and the horns. My original harness was so hacked up it was
impractical to use as a guide.
What is the correct way to route it? Here is a link to a picture for
illustration.
http://img318.imageshack.us/my.php?image=headlampwiringrouting9ii.jpg
Choice A - Up above the heater tube, running over the inner fender
coming out behind the left headlamp
Choice B - Under the heater tube, running along the inner fender
coming through next to the steering box and radiator
Choice C - I have it so wrong that
As you see, I have it with choice A right now, but it seems like the
connectors are a little short.
Thanks, after this, I have to put a grommet for the battery cable into
the truck, and the harness is all routed and clipped in. Plus I just
finished putting all of the gauges back into the dash.
I'm having fun!!!!
Patton
--
Patton Dickson - '57 A-H 100-Six
Homepage - http://Austin-Healeys.com/
|
