That could be down by changing the master cylinder and slave cylinder
to a different bore. Also you can move the position the push rod
attaches to the pedal up about 1/2 " . This will change the ratio of
the pedal from approximatly 3.6:1 to 4.75:1.
We had a Healey come in the shop one time that the brake hoses were
swelling up when you pressed on the brake pedal and there was a soft
pedal. No matter what we did we could not get a good brake pedal. We
then found that someone had moved the push rod attachment point
increasing the pressure in the system.
David Nock
British Car Specialists
Stockton Ca 95205
209-948-8767
www.britishcarspecialists.com
On Sep 21, 2005, at 6:37 AM, I Erbs wrote:
> I'd like a servo in my clutch system. I/ve had 3 left knee surgeries
> and
> could use some boost to my clutch. Anyone out there have experience
> with
> such a modification, or suggestions on how to increase work without
> increasing effort, at least in relation to clutch actuation :)
> Ira
> 59 BT7
|