The most likely problem is that some of the wires on the 35 A. fuse
holder are not making good contact or the fuse itself is intermittant.
The feed to the fuse comes from a contact on the ignition switch which
is apparently making contact ok since the ignition is working. The
circuits in question are all fed from this fuse when the ignition switch
is "on". Clean & check the fuse holder wires , the fuse contacts
themselves, & replace the fuse.
Dave Russell
BN2
DRKTYME@aol.com wrote:
> My 64 BJ8 has been having an intermittent problem and I'm wondering
> if someone can help. The car runs well, but after a bit all the
> electrical gauges-fuel, tach and turn signals go dead. The fuse is
> good and shows power to the fuse holder. I'm hoping this is something
> someone has seen before. Thanks!
|