Steve -
Make sure you have a good selection of spacers that go under the
castle nut so when you get it all back together, you will be able to
tighten it all up correctly. You don't want to finish the job and
then have to wait 5 days because you forgot to have the right spacers.
Otherwise its a pretty straightforward job.
Regards,
Alan
'53 BN1 '64 BJ8
On 8/18/05, Rizzo Steven D LtCol AETC/XPRU <Steven.Rizzo@randolph.af.mil> wrote:
> Hi, Listers!
>
> Getting ready to replace the front and rear hubs/splines on my BJ8. My
> current ones are OK but I decided to get new ones and now am wondering if
> there are any "quirks" or "watch out fors" or "you should...." Type items
> for this chore? If there is any helpful hints or ideas I should use I would
> appreciate your comments! I think I have the rear installation "down" as I
> have removed them many times before, but the front ones look much more
> complex. Thanks in advance!
>
> Stever
|