Strange, they worked fine on my car.
59 BT7
> I found the Speed Bleeder P/N SB3824 at a couple of local supply houses.
>They
> worked fine on the rear brake cylinders and the clutch slave. But they did
>not
> work on the front brakes. They are (at an overall length of 1.19" according
>to
> the blister pack) too short. You can not get a wrench on them to seat them
> properly due to the recessed area of the caliper housing. Looking at the
>Speed
> Bleeder site (http://www.speedbleeder.com/size.htm), it would appear that P/N
> SB3824L (at 1.53" long) would be in order for the front calipers. But, alas,
> the local parts houses do not stock them.
>
> Cheers.
> Paul, 62 BT7-II, Knoxville, TN
|