John
I used (15) #6 x 1/2" Phillips flat head screws for attaching the aluminum
trim piece to the irons.
For attaching the wood bow to the irons I went with chrome plated Phillips
oval head screws (although originally they were probably non-chrome flat head
Phillips). Nine #10 x 3/4" wood screws to secure directly to the bow and four
#10-32 x 1" to screw into the "T" nuts at the ends of the bow.
Good luck.
Alan
BN6
In a message dated 6/1/2005 1:41:51 P.M. Eastern Standard Time,
John.Close@sduhsd.net writes:
Hello Listers - I'm in the process of assembling a BN6 top. I have none
of the screws which fasten the metal front bow to the wooden part and
none of the screws that fasten the front aluminum trim piece to the
wood. Would someone please tell me the type and length of these screws?
I'm also looking for a detailed close-up of the front left or right
outside corner of the top, showing how it's finished. Thanks in advance
|