healeys
[Top] [All Lists]

Re: Transmission Mount

To: Ben Prince <blprince2@comcast.net>
Subject: Re: Transmission Mount
From: Blue One Hundred <healey.nut@gmail.com>
Date: Wed, 1 Jun 2005 11:52:27 +0800
The part you need to get is to order from someone who is a Healey
specialist rather than from Moss directly.

Call the nocks @ www.britishcarspecialists.com they are Moss resellers
& Healey specialists... they will know which parts from Moss are crap
and which ones are good, they have a huge stock of their own healey
parts seperate from Moss, they may have the proper mounts in stock. 
If not, they will have the bolts.

Regards,

Alan

'53 BN1 '64 BJ8

On 6/1/05, Ben Prince <blprince2@comcast.net> wrote:
> Listers
> 
> I am replacing the gearbox mountings, Moss P/N 011-146, on my BN1.  The old
> overdrive-to-mounting-bolts are 1/2" BSF  (length is 1-3/4").  Moss states
> that UNF bolts, Moss P/N 031-368, are required for the new mounts.
> 
>  Both the old and new mounts have a fine thread for the bolts to screw into,
> but they are not the same since one is BSF and the other is supposedly UNF.
> (I assume that UNF is the same as SAE.)
> 
> However, BSF 1/2", SAE 1/2" , SAE 7/16" and 12 mm 1-1/4" pitch all don't work
> in the new mounts.  The 12 mm metric comes close since it does screw in, but
> the fit is sloppy.
> 
> Can anyone tell me what bolts are needed for the new mounts and where to get
> then?
> 
> Thanks,
> Ben
> BN1




<Prev in Thread] Current Thread [Next in Thread>