Surgeons sells the 8-sided hub nut wrench at a great price. Make sure you
don't buy the one for the late octagon knockoffs as there seem to be 2
wrench designs out there.
You can use pieces of pvc pipe to drive the seal out and the new one in.
I've written up some info on seal & bearing replacement available at--
http://www.acmefluid.com.au/larry/
(scroll to bottom)
Hylomar works great on either side of the paper gaskets under the axle
flanges.
Suggest you drain your axle first so the fluid doesn't leak out on your
drums--suggest removing them before pulling the axle halves.
--
Steve Gerow
Pasadena CA
59 BN6
|