To: | <mnhealey@gmail.com> |
---|---|
Subject: | Re: Overdrive not working correctly |
From: | "M Lempert" <mlempert@bellsouth.net> |
Date: | Fri, 6 May 2005 21:31:51 -0400 |
"I also noticed that the 100-6 and the 3000's overdrive relay is wired almost backwards to each other." The wiring diagram in the Bentley manual is not correct. It has the ground wire switched with another - W1 and W2 reversed. Not good. Could this be your problem ? The wiring should be this (I have a picture if you want): On the left, top to bottom: W1 - White with purple (2) C2 - White with green (2) C1 - White (2) On the right, single connection lower right: W2 - Black Regards, Mike L. |
<Prev in Thread] | Current Thread | [Next in Thread> |
---|---|---|
|
Previous by Date: | Re: healey axels for the taking, Greg Lemon |
---|---|
Next by Date: | Re: Overdrive not working correctly (now fixed!), mnhealey |
Previous by Thread: | Re: Overdrive not working correctly, mnhealey |
Next by Thread: | SQUEAKY BRAKES - DO I PAY FOR THIS?, scott@scottjgraham.com |
Indexes: | [Date] [Thread] [Top] [All Lists] |