Listers,
I have spent the morning wiring in the new harness under the dash of my BN1.
The wiring diagram shows the brown with blue wire (number 36 on the
schematic) going to one side of the ignition switch and also to terminal "A"
of the headlight switch. There is, however, only one brown with blue wire in
the harness. Should a brown with blue jumper be run from one side of the
ignition to terminal "A" of the headlight switch?
Also, there are two black ground wires joined to a single eyelet. The
schematic seems to indicate that these go to the tachometer. Should it be
placed over one of the attachment posts and the nut tightened over it or.
should it really be screwed to the steering support column as I have seen it
on another car? It seems the latter may provide a better ground.
Thanks,
--Michael
'55 BN1
|