Bob:
The shims are used to adjust the resting position of the pedals. I've seen
some aftermarket cyls with adjustable pushrods for this purpose.
Earl Kagna
Victoria, B.C.
BT7 tri-carb
BJ8
----- Original Message -----
From: "Bob Spidell" <bspidell@comcast.net>
To: "healeylist" <healeys@autox.team.net>
Sent: Tuesday, April 26, 2005 6:59 AM
Subject: Clutch MC Shims
Anybody know why there are shims/spacers between the clutch MC and the
firewall?
All I can surmise is they are needed to adjust the throw on the pushrod.
bs
***************************************************************
Bob Spidell San Jose, CA bspidell@comcast.net
'67 Austin-Healey 3000 '56 Austin-Healey 100M
***************************************************************
|