Hi John,
Toe in is measured at the tire diameter. To decrease toe in, loosen the
locknuts on both ends of the cross tube & rotate the tube in a direction
that lengthens it.
Dave Russell
BN2
John Soderling wrote:
> A follow up question: To decrease the toe-in, which direction do I
> turn the center tie-rod cross-tube? Looking front the front of the
> car, do I turn the tube up or down? Thanks. Vrooom vrooom, John
>
> ----- Original Message ----- From: John Soderling To: Healey List
> Sent: Wednesday, April 20, 2005 7:29 PM Subject: Manual Front Wheel
> Alignment Question
>
>
> I have a question regarding wheel alignment specs. So my question is:
> when the Workshop Manual says the toe-in should be 1/16", what is
> the distance they use between the front and rear measured points?
> Tire diameter? Wheel diameter? Other?
>
> Thanks for any help.
>
> Vrooom vrooom, John 100-Six Erika the Red
|