BTW - This request for parts is due to the machinist that now has my
Healey 100M head with the enlarged guide hole (due to a valve trying to
go sideways). He needs the bottom spring retainer at least in case he
has to enlarge the through hole for the oversize guide. He also needs
an inner spring to see if the ovesize guide will fit inside it. A used
inner and outer sping for one of the valves would help in this repair also.
Mike MacLean
San Bernardino, CA
--
No virus found in this outgoing message.
Checked by AVG Anti-Virus.
Version: 7.0.308 / Virus Database: 266.9.3 - Release Date: 4/5/2005
|