Patton -
I used DAP Weldwood contact cement from Lowe's. Home Depot might have the
same stuff. If what you are covering has wood in it, such as the top of the
dash, you can staple or tack the edges of the vinyl to the wood for
reinforcement after using the contact cement and folding over the vinyl.
Steve Byers
HBJ8L/36666
BJ8 Registry
Havelock, NC USA
----- Original Message -----
From: Patton Dickson
To: Rich C
Cc: davidwjones ; BJ8Healeys ; Healey List
Sent: Sunday, April 03, 2005 7:22 PM
Subject: Re: Covering a Dash and Trim Chome Question
The contact glue I used ate right throught the vinyl. I cleaned it, cut
another piece and tried to use another that said for vinyl and metal, but it
was really too thick for this. I will have to strip again and start over.
What type of glue is recommended?
Patton
|