John,
The ground strap on the BN6 and BN7 connects from the switch to the rear
vertical bolt holding the left side bump box to the body.
Rich Chrysler
----- Original Message -----
From: "John Homonek" <jhomonek@mindspring.com>
To: <healeys@autox.team.net>
Sent: Tuesday, March 22, 2005 9:43 PM
Subject: Need Help with BN7 On/Off Ground Strap Location
> Good Afternoon Everyone,
>
> This is a for a 1959 3000 BN7 Mark I. Where does the ground strap attach
> to
> the body or frame? The On/Off switch is on the drivers side in the
> trunk
> and goes through the bulkhead there inside to the area above the rearend,
> The cable is about 10" long and I do not see a point to attach to the
> frame
> or body..of course the other end of the cable goes on the On/Off switch.
>
> These two seaters are a little different in some ways.
>
> Thank you for your help in advance. This site has been a great help
> during
> this restoration and it seems that beneficial threads appear at the right
> time to coincide with the progress on my Healey.
>
> John E. Homonek II
>
> 1959 BN7
|