Hello all,
Dave is quite right in what he says here, but the tank cannot actually reach
the armacord of the bulkhead because of the position of the tank strap
anchor brackets. This position causes the straps with the fibre cushioning
strip to curve down to reach the clevis pin holes, therefore the tank is
against the fibre strips which at that point bear against the strap and
anchor brackets.
----- Original Message -----
From: "davidwjones" <davidwjones@cox.net>
To: "Kevin" <krogers@new.rr.com>; <healeys@autox.team.net>
Sent: Thursday, March 17, 2005 12:06 PM
Subject: Re: Fuel tank intallaion
> The tank straps are black, and the only thing between the tank and the
> bulkhead is the armacord.
> Dave J.
> Dear list
> A few final questions before I install the tank.
>
> What color/finish should the straps be?
> is there any barrier between the front of the tank and the bulk head of
> the
> trunk? (foam padding)
>
> Thank you
> Kevin R
> 60 BN7
|