You can also find suitable pins on the "Help" parts rack at your
neighborhood Pep Boys, Auto zone etc. Slight oversize drilling is necessary
and the bronze bushings that come with some of the pins aren't needed.
Just drill the proper size hole(straight) ,install pin, a couple of copper
washers, and your done. If you screw up then you can always buy some elses
loose hinges and try again.
Mark
----- Original Message -----
From: "Sid Bronson" <bron@rmci.net>
To: "Rob Molyneux" <rwmolyneux@shaw.ca>; "Healeys@Autox.Team.Net"
<healeys@Autox.Team.Net>
Sent: Sunday, January 16, 2005 12:40 PM
Subject: Re: 3000 Door Hinge Pin Repair
> Rob,
> Go to your Chevrolet dealer and get part # 20046147 25d3 pin (I believe
it
> is a set of 2) It requires a slight reaming of the worn hinges and they
need
> to be cut to length.
> Sid 65 BJ8
|