Kurt,
My guess would be a slight imperfection in the mating surfaces between
the flare on the pipe(s) and the concave surface in the cylinder(s).
This usually happens on lines that need to hold pressure (the reservoir lines
can't hold pressure ... the fluid just goes back to the reservoir), but that's
my guess.
bs
********************************************
Bob Spidell San Jose, CA bspidell@comcast.net
'67 Austin-Healey 3000 '56 Austin-Healey 100M
********************************************
> 62bt7 both brake and clutch master clys rebuilt and function fine,
> however on lines from reservoir to clys, slight weeping of fluid between
> brake lines and fittings at the clys.
> I have taken these apart several times and cleaned and checked them and
> seem fine but after about 2-3 days these areas are wet with fluid again
> nothing significant but visible. Wrong lines or missing parts? Kurt
> L.
|