Lin,
These particular fasteners have BMC part numbers rather than following the
codes. Therefore they can't be identified in the normal "code breakdown"
way.
Almost all your interior panel fasteners on your BT7 are #6 self tapping
posidrive chromed oval head (countersunk screws with slightly domed
surfaces). These sit in small cupped washers to suit the head sizes. Most
are approx. 5/8" long.
The aluminum cover plate screws for a BT7 are approx. #4 self tapping
posidrive truss head (flat under the head with slightly domed surface)
chromed screws approx. 5/8" long.
Hope this helps.
Rich Chrysler
----- Original Message -----
From: "linwood rose" <linwoodrose@mac.com>
To: "list healey" <healeys@Autox.Team.Net>
Sent: Sunday, December 26, 2004 10:04 PM
Subject: Interior screw codes
> Can someone help me on these screw codes. I figured out most everything
> with the Anderson-Moment book, but I don't know about the SCREW # AND
> LENGTH for the aluminum cover plates and the interior panels fasteners:
>
> 54K3024 -
> AHB8384 -
> 54K3014 -
> 54K3016 -
>
> Thanks as always for the help.
>
> Lin Rose
> 1960 BT7 in restoration
> 1959 Bugeye
|