Charlie,
Dunlop's manufacturing tolerance is + or - 1/16" (that's .062") at the bead
seat for both out of round and lateral. Interestingly, my Dunlop distributor
periodically checks new wheels at random from his stock. Using a dial
indicator with the wheel mounted on a spinning hub arrangement and the
knockoff tightened down the worst out of true wheel he's seen in the last 15
years was .017" out. He says most are out an average of .007" to .012". Not
bad I'd say.
Rich Chrysler
----- Original Message -----
From: "Charlie Vaselaar" <cvaselaar@earthlink.net>
To: <healeys@autox.team.net>
Cc: "Vaselaar, Andy (Hotmail)" <AndyV133@hotmail.com>
Sent: Monday, November 08, 2004 9:13 PM
Subject: BJ8 Wire Wheel Tolerances
> Can anybody advise the tolerances are for stock BJ8 wire wheels? Out of
> round and lateral displacement.
>
> Thanks,
>
> C. Vaselaar
|