Kenny,
I had the same problem and it turned out to be a broken connector in the back.
Note: these are the metal strips that connect the screw terminals to the
internal pieces and parts. Regulator must be separated from the firewall to
inspect. Must replace with new regulator, although I got by several years with
wire soldered to the 2 open ends. Must be a common problem with regulators
built in 1961.
Best Regards,
Olin Brimberry
61 BT7 MKII
Date: Wed, 06 Oct 2004 15:20:42 -0700
From: "Kenny Johnson" <theswed@hotmail.com>
Subject: voltage regulator wiring
I was experiencing problems with my battery not charging. I had the
generator checked and it works fine. I think my voltage reg might be wired
wrong. I have a new wiring harness from Moss. Can anyone tell me which
colored wires go on each post (A1, A, F, D, E) of the voltage regulator?
Thanks.
Kenny
61 BT-7
Check out the new British Cars Forum:
http://www.team.net/the-local/tiki-view_forum.php?forumId=8
|