Anybody bolted-up a 1.50 roller rocker to an otherwise stock 6-cyl
Healey? The stock rocker is nominally 1.45; I'm wondering if the
roller will work with the stock springs and still allow clearance in the
spring coils and between the valves and the block and pistons.
AFAIK, neither the head or the block have been shaved.
bs
********************************************
Bob Spidell San Jose, CA bspidell@pacbell.net
'67 Austin-Healey 3000 '56 Austin-Healey 100M
********************************************
Check out the new British Cars Forum:
http://www.team.net/the-local/tiki-view_forum.php?forumId=8
|